Add a brutal horizontal spinner weapon to your
Viper Combat Robot!
- High-speed Brushless Motor and Controller mated to an overhead horizontal bar!
- Mounts on the existing Viper Combat Robot.
- No soldering required!
Kit Includes:* Requires modifying the original plastic armor, or buy a modified set here:
Horizontal Spinner Armor Set Specifications: Weight: Added to the base Viper kit, the total weight using the 5.5in titanium bar is 448g (15.8oz) with a 9V battery, 421g (14.85oz) with a 2S 300mAh lipoly, or 428g (15.1oz) with a 3S 300mAh lipoly.
Blade diameter: 14cm (5.5in). Accommodates blades up to 15.2cm (6in) tip-to-tip, weighing 79g or less (for use with 3S lipoly).
Voltage: 7.4V - 11.1V. The 7.4V battery included with the Viper base kit works great, but a
3S lipoly will give the weapon extra oomph! We don't recommend running this off a 9V battery, as it cannot supply the current needed for fast and repeated spin-ups.
Weapon Bar Choice: If you want to swap to a different Weapon Blade, the
FingerTech Blade Mountfits all of our custom blades. Weights are shown below so you can make sure you don't go overweight!
* To determine the weight using a different bar, subtract 448g for the 5.5in titanium bar and add the weight of your chosen bar.
Requires: -
Weapon Safety Lock - 5/64in hex wrench (came with your Viper kit)
- Phillips screwdrivers #1 and #2
- Threadlock liquid
- Electrical tape, zipties, or twist-ties
Safety: - As with anything related to combat robots, it is potentially dangerous to add a spinning weapon to a robot. Never power up the robot outside of a
safety enclosure. Always use a
safety lock and follow proper activation procedure. Visit our
Safety Information page for more information.
Shopping cart
Login Status
